Blackjack Helmet-mount Flashlight Holder

The tones drop or the bell rings you go from idle sitting to as fast as you can go in seconds. Lives hang in the balance your actions for the next minutes. You arrive on scene and begin your primary search operations. It's dark, you can't see your hand in front of your face. That flashlight on your turnout coat is fine when your standing up, but what are going to do now that your crawling.
You don't have time to worry about a flashlight holder that's going to get you hurt. With traditional firefighter flashlight helmet holders they sit above your helmet causing you to be more exposed to overhead entrapment and becoming tangled in the mess. Traditional flashlight holders are flimsy and break - not to mention they conduct heat extremely well. Helmet flashlight holders have lacked the engineering and design that firefighters like you need.
Until now. Introducing the BlackJack Flashlight Helmet Holder. ThePublicSafetyStore.com has teamed up with this wonderful manufacturer to produce a product long needed by the fire service. It clips below your fire helmet and holds your Streamlight, Pelican, Brightstar, SureFire and other popular flashlights brands securely in place. It won't budge.
The BlackJack Holder is the toughest flashlight holder we could find on the market.
Tough: Built from aircraft grade 6061 aluminum, not stamped stainless steel, or thermoplastic, so it can stand up to the same punishment that you do.
Light weight: only 1.8oz
Necessary: Superior under brim patented design securely holds the light on the helmet where you put it, where you need it.
Adaptable: Fits most firefighting helmets, both traditional and modern styles. The Blackjack helmet flashlight holder accommodates 4-AA size lights from Pelican, Streamlight, Kohler-Brightstar, and Underwater Kinetics. The Blackjack will also accommodate the new generation of 123 size lithium powered lights from Surefire, and Pelican.
Models:
BJ001 - Fits Pelican Stealth lights including the RECOIL, Brightstar 4-AA, and UK 4-AA lights. Also works with NEW Pelican PM6 3330, and 3320 Lithium lights, and NEW Streamlight 2-AA lights. Interior diameter .9' or 23.5mm. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ002 - Fits Streamlight pro-polymer 4-AA series lights including the LUXEON. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ005 - Designed to fit round, and semi-round lights such as the Pelican 2350, and 3330 lights, as well as the Streamlight Poly-Tac, and Surefire G2 series lights. The BJ005 is the direct result of input from our customers who wanted the ability to remove their light, use in hand and then return to the helmet. The BJ005 will accommodate lights up to 1 1/8' in width. It is important to note that with the larger lights, the fit, and functionality of the mount is greatly increased with a 'Nitrolon' or plastic outer shell on the light. Large metal lights with knurl on the body of light tend to be difficult to remove.
ACE - Designed to fit round 'Tactical' style lights such as the Pelican M6, 333o, and 2300 series lights. The Ace also works great with the Surefire G2 Fire and Rescue lights, as well as the Streamlight Poly-Tac series lights.
NEW! ALL-IN - Designed to fit the new Pelican 3315, 3310 lights. The All In will also accommodate the Pelican 2400 Series lights, including the Stealthlight models. The All in is made from 6061 Aluminum, and has the exact same characteristics as our other Blackjacks, including the Patented 'Under the Brim' mounting position, Stainless Steel hardware, and embedded allen tool.
FULL HOUSE - Designed to fit 3/4AA size lights from Pelican (2400 series), Streamlight (Propolymer 4AA, Haz-Lo 3/4AA), UK 3/4AA.

The tones drop or the bell rings you go from idle sitting to as fast as you can go in seconds. Lives hang in the balance your actions for the next minutes. You arrive on scene and begin your primary search operations. It's dark, you can't see your hand in front of your face. That flashlight on your turnout coat is fine when your standing up, but what are going to do now that your crawling.
You don't have time to worry about a flashlight holder that's going to get you hurt. With traditional firefighter flashlight helmet holders they sit above your helmet causing you to be more exposed to overhead entrapment and becoming tangled in the mess. Traditional flashlight holders are flimsy and break - not to mention they conduct heat extremely well. Helmet flashlight holders have lacked the engineering and design that firefighters like you need.
Until now. Introducing the BlackJack Flashlight Helmet Holder. ThePublicSafetyStore.com has teamed up with this wonderful manufacturer to produce a product long needed by the fire service. It clips below your fire helmet and holds your Streamlight, Pelican, Brightstar, SureFire and other popular flashlights brands securely in place. It won't budge.
The BlackJack Holder is the toughest flashlight holder we could find on the market.
Tough: Built from aircraft grade 6061 aluminum, not stamped stainless steel, or thermoplastic, so it can stand up to the same punishment that you do.
Light weight: only 1.8oz
Necessary: Superior under brim patented design securely holds the light on the helmet where you put it, where you need it.
Adaptable: Fits most firefighting helmets, both traditional and modern styles. The Blackjack helmet flashlight holder accommodates 4-AA size lights from Pelican, Streamlight, Kohler-Brightstar, and Underwater Kinetics. The Blackjack will also accommodate the new generation of 123 size lithium powered lights from Surefire, and Pelican.
Models:
BJ001 - Fits Pelican Stealth lights including the RECOIL, Brightstar 4-AA, and UK 4-AA lights. Also works with NEW Pelican PM6 3330, and 3320 Lithium lights, and NEW Streamlight 2-AA lights. Interior diameter .9' or 23.5mm. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ002 - Fits Streamlight pro-polymer 4-AA series lights including the LUXEON. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ005 - Designed to fit round, and semi-round lights such as the Pelican 2350, and 3330 lights, as well as the Streamlight Poly-Tac, and Surefire G2 series lights. The BJ005 is the direct result of input from our customers who wanted the ability to remove their light, use in hand and then return to the helmet. The BJ005 will accommodate lights up to 1 1/8' in width. It is important to note that with the larger lights, the fit, and functionality of the mount is greatly increased with a 'Nitrolon' or plastic outer shell on the light. Large metal lights with knurl on the body of light tend to be difficult to remove.
ACE - Designed to fit round 'Tactical' style lights such as the Pelican M6, 333o, and 2300 series lights. The Ace also works great with the Surefire G2 Fire and Rescue lights, as well as the Streamlight Poly-Tac series lights.
NEW! ALL-IN - Designed to fit the new Pelican 3315, 3310 lights. The All In will also accommodate the Pelican 2400 Series lights, including the Stealthlight models. The All in is made from 6061 Aluminum, and has the exact same characteristics as our other Blackjacks, including the Patented 'Under the Brim' mounting position, Stainless Steel hardware, and embedded allen tool.
FULL HOUSE - Designed to fit 3/4AA size lights from Pelican (2400 series), Streamlight (Propolymer 4AA, Haz-Lo 3/4AA), UK 3/4AA.

The tones drop or the bell rings you go from idle sitting to as fast as you can go in seconds. Lives hang in the balance your actions for the next minutes. You arrive on scene and begin your primary search operations. It's dark, you can't see your hand in front of your face. That flashlight on your turnout coat is fine when your standing up, but what are going to do now that your crawling.
You don't have time to worry about a flashlight holder that's going to get you hurt. With traditional firefighter flashlight helmet holders they sit above your helmet causing you to be more exposed to overhead entrapment and becoming tangled in the mess. Traditional flashlight holders are flimsy and break - not to mention they conduct heat extremely well. Helmet flashlight holders have lacked the engineering and design that firefighters like you need.
Until now. Introducing the BlackJack Flashlight Helmet Holder. ThePublicSafetyStore.com has teamed up with this wonderful manufacturer to produce a product long needed by the fire service. It clips below your fire helmet and holds your Streamlight, Pelican, Brightstar, SureFire and other popular flashlights brands securely in place. It won't budge.
The BlackJack Holder is the toughest flashlight holder we could find on the market.
Tough: Built from aircraft grade 6061 aluminum, not stamped stainless steel, or thermoplastic, so it can stand up to the same punishment that you do.
Light weight: only 1.8oz
Necessary: Superior under brim patented design securely holds the light on the helmet where you put it, where you need it.
Adaptable: Fits most firefighting helmets, both traditional and modern styles. The Blackjack helmet flashlight holder accommodates 4-AA size lights from Pelican, Streamlight, Kohler-Brightstar, and Underwater Kinetics. The Blackjack will also accommodate the new generation of 123 size lithium powered lights from Surefire, and Pelican.
Models:
BJ001 - Fits Pelican Stealth lights including the RECOIL, Brightstar 4-AA, and UK 4-AA lights. Also works with NEW Pelican PM6 3330, and 3320 Lithium lights, and NEW Streamlight 2-AA lights. Interior diameter .9' or 23.5mm. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ002 - Fits Streamlight pro-polymer 4-AA series lights including the LUXEON. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ005 - Designed to fit round, and semi-round lights such as the Pelican 2350, and 3330 lights, as well as the Streamlight Poly-Tac, and Surefire G2 series lights. The BJ005 is the direct result of input from our customers who wanted the ability to remove their light, use in hand and then return to the helmet. The BJ005 will accommodate lights up to 1 1/8' in width. It is important to note that with the larger lights, the fit, and functionality of the mount is greatly increased with a 'Nitrolon' or plastic outer shell on the light. Large metal lights with knurl on the body of light tend to be difficult to remove.
ACE - Designed to fit round 'Tactical' style lights such as the Pelican M6, 333o, and 2300 series lights. The Ace also works great with the Surefire G2 Fire and Rescue lights, as well as the Streamlight Poly-Tac series lights.
NEW! ALL-IN - Designed to fit the new Pelican 3315, 3310 lights. The All In will also accommodate the Pelican 2400 Series lights, including the Stealthlight models. The All in is made from 6061 Aluminum, and has the exact same characteristics as our other Blackjacks, including the Patented 'Under the Brim' mounting position, Stainless Steel hardware, and embedded allen tool.
FULL HOUSE - Designed to fit 3/4AA size lights from Pelican (2400 series), Streamlight (Propolymer 4AA, Haz-Lo 3/4AA), UK 3/4AA.

The tones drop or the bell rings you go from idle sitting to as fast as you can go in seconds. Lives hang in the balance your actions for the next minutes. You arrive on scene and begin your primary search operations. It's dark, you can't see your hand in front of your face. That flashlight on your turnout coat is fine when your standing up, but what are going to do now that your crawling.
You don't have time to worry about a flashlight holder that's going to get you hurt. With traditional firefighter flashlight helmet holders they sit above your helmet causing you to be more exposed to overhead entrapment and becoming tangled in the mess. Traditional flashlight holders are flimsy and break - not to mention they conduct heat extremely well. Helmet flashlight holders have lacked the engineering and design that firefighters like you need.
Until now. Introducing the BlackJack Flashlight Helmet Holder. ThePublicSafetyStore.com has teamed up with this wonderful manufacturer to produce a product long needed by the fire service. It clips below your fire helmet and holds your Streamlight, Pelican, Brightstar, SureFire and other popular flashlights brands securely in place. It won't budge.
The BlackJack Holder is the toughest flashlight holder we could find on the market.
Tough: Built from aircraft grade 6061 aluminum, not stamped stainless steel, or thermoplastic, so it can stand up to the same punishment that you do.
Light weight: only 1.8oz
Necessary: Superior under brim patented design securely holds the light on the helmet where you put it, where you need it.
Adaptable: Fits most firefighting helmets, both traditional and modern styles. The Blackjack helmet flashlight holder accommodates 4-AA size lights from Pelican, Streamlight, Kohler-Brightstar, and Underwater Kinetics. The Blackjack will also accommodate the new generation of 123 size lithium powered lights from Surefire, and Pelican.
Models:
BJ001 - Fits Pelican Stealth lights including the RECOIL, Brightstar 4-AA, and UK 4-AA lights. Also works with NEW Pelican PM6 3330, and 3320 Lithium lights, and NEW Streamlight 2-AA lights. Interior diameter .9' or 23.5mm. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ002 - Fits Streamlight pro-polymer 4-AA series lights including the LUXEON. Discontinued, limited stock available. Replaced with the FULL HOUSE model.
BJ005 - Designed to fit round, and semi-round lights such as the Pelican 2350, and 3330 lights, as well as the Streamlight Poly-Tac, and Surefire G2 series lights. The BJ005 is the direct result of input from our customers who wanted the ability to remove their light, use in hand and then return to the helmet. The BJ005 will accommodate lights up to 1 1/8' in width. It is important to note that with the larger lights, the fit, and functionality of the mount is greatly increased with a 'Nitrolon' or plastic outer shell on the light. Large metal lights with knurl on the body of light tend to be difficult to remove.
ACE - Designed to fit round 'Tactical' style lights such as the Pelican M6, 333o, and 2300 series lights. The Ace also works great with the Surefire G2 Fire and Rescue lights, as well as the Streamlight Poly-Tac series lights.
NEW! ALL-IN - Designed to fit the new Pelican 3315, 3310 lights. The All In will also accommodate the Pelican 2400 Series lights, including the Stealthlight models. The All in is made from 6061 Aluminum, and has the exact same characteristics as our other Blackjacks, including the Patented 'Under the Brim' mounting position, Stainless Steel hardware, and embedded allen tool.
FULL HOUSE - Designed to fit 3/4AA size lights from Pelican (2400 series), Streamlight (Propolymer 4AA, Haz-Lo 3/4AA), UK 3/4AA.